Rhenium Rod
Rhenium Rod - Image 2

Rhenium Rod

Category:

Rhenium Rod

Classification: According to the different usage requirements and physical properties, Rhenium Bar is divided into “high-density Rhenium bar”, and “medium-density Rhenium bar”. While according to the chemical composition, it is divided into “high purity 99.99%”, and “ultra-high purity 99. 999%”.
Specification: 4N grade Re>99 99%(calculated by subtraction method, except gas element).
Appearance:  Grey or silver metallic cylinder or square block.
Application: Medium-density rhenium rods can be used as additives for superalloys. High-density Rhenium rods can be used for the manufacture of rods, wires, or high-temperature structural parts.
5N grade Re>99.999%( Calculated by subtraction method, except gas element).

Medium density Rhenium bar’s density is about 12g/cc while high-density rhenium bar’s density is about 18 5g/cc.

Rhenium Rod Properties

Round rod D(10~20) *L (50~300) mm. Can be customized as per requirement.

Chemical Composition of Rhenium Rod

Main content: Re 99.95% min（excluding gas elements）
Maximum trace metallic impurities, analyzed by ICP-MS
Trace Impurities (%, max)
Element 4N Grade 5N Grade Element 4N Grade 5N Grade
Na 0.0010 0.0001 Ni 0.0001 0.00001
Mg 0.0001 0.00001 Cu 0.0001 0.00001
Al 0.0001 0.00001 Zn 0.0001 0.00001
Si 0.0005 0.00005 As 0.0001 0.00001
P 0.0001 0.00005 Zr 0.0001 0.00001
K 0.0010 0.0001 Mo 0.0010 0.0002
Ca 0.0005 0.00005 Cd 0.0001 0.00001
Ti 0.0001 0.00001 Sn 0.0001 0.00001
V 0.0001 0.00001 Sb 0.0001 0.00001
Cr 0.0001 0.00001 Ta 0.0001 0.00001
Mn 0.0001 0.00001 W 0.0010 0.0002
Fe 0.0005 0.00005 Pb 0.0001 0.00001
Co 0.0001 0.00001 Bi 0.0001 0.00001
Se 0.0001 0.00001 Tl 0.0001 0.00001
Gas Element for Medium Density(%, max)
O 0.03 0.03 C 0.005 0.002
N 0.003 0.003 H 0.002 0.002
Gas Element for High Density(%, max)
O 0.003 0.003 C 0.005 0.002
N 0.003 0.003 H 0.002 0.002

Related products